Mounts directly to receiver. No bases or drilling and tapping required.
- Separate the saddle base and mount cap with a screwdriver.
- Remove the slave screws from the top of the rifles receiver, align the saddle bases with the holes and attach them with the mounting screws (10-32) and hexagon key (1/8) provided. A thread adhesive such as Loctite should be used to secure these screws to the receiver. DO NOT ALLOW THREADADHESIVE TO GET INTO ACTION.
- Set the scope into the bottom of the saddles and secure it there with the mount caps. Make sure you have adequate eye relief, then tighten the 6-40 screws securely. DO NOT USE THREAD ADHESIVE ON MOUNT CAP SCREWS.
American Made Accessory